Tipper Truck Hydraulic Pump
- High-pressure output: Up to 350 bar for strong crimping force.
- Flexible power options: DC12/24V and AC110–415V available for systems.
- Fast response control: Manifold valves deliver smooth open/close operation.
- Compact integrated design: Motor, pump, tank, valves in one unit.
- QC-tested reliability: Pressure/flow bench tested for consistent performance.
TIPPER TRUCK HYDRAULIC TYPES
12V Tipper Truck Hydraulic Pump
A 12V tipper truck hydraulic pump is a compact DC power pack built for mobile lifting where space and wiring are limited. Typical setups use a high-efficiency gear pump, integrated manifold valves, and a 3–10 L reservoir, delivering steady flow for smooth tipping. Ideal for light-duty dump trailers, small tippers, and utility bodies.
24V Tipper Truck Hydraulic Pump
Designed for commercial vehicles, a 24V tipper truck hydraulic pump offers higher available power with lower current draw than 12V systems. Common configurations provide 2–16 LPM flow and pressure up to 210 bar, with single- or double-acting circuits and wired or wireless controls. Used on medium-duty tippers, dump bodies, and on-road service trucks.
Single Acting Tipper Truck Hydraulic Pump
A single acting tipper truck hydraulic pump is the classic “power up, gravity down” solution for reliable bed lifting. The unit combines a DC motor, gear pump, reservoir, and a valve block with relief and lowering functions. Typical pressure ranges reach 180–210 bar depending on setup. Best for dump trailers, flatbeds with scissor hoists, and intermittent-duty tipping.
Double Acting Tipper Truck Hydraulic Pump
A double acting tipper truck hydraulic pump supports “power up, power down” control for applications needing controlled lowering and faster cycle times. With bidirectional valve logic, it pressurizes both sides of a double-acting cylinder to improve stability on uneven ground. Typical options include 12V/24V motors, 2–16 LPM flow, and adjustable relief settings. Ideal for heavy-duty tipper bodies and jobsite operation.
Your Reliable 12V/24V Tipper Truck Hydraulic Pump China OEM Supplier
Hydrath is your trusted Tipper Truck Hydraulic Pump engineering partner, supporting CAD reviews and integration with existing cylinders, scissor hoists, and dump bodies. Each unit is 100% inspected and tested on pressure/flow benches for consistent lifting performance.
Choose 12V for compact mobile setups, or 24V platforms for higher power with lower current draw, in single-acting or double-acting circuits.
With a compact footprint and service-friendly manifold layout, installation stays fast and daily tipping cycles stay dependable.
| Item | Specification |
|---|---|
| Product Type | DC hydraulic power pack for tipper truck / dump trailer |
| Voltage | 12V DC / 24V DC |
| Acting Type | Single acting (power up / gravity down) or Double acting (power up / power down) |
| Motor Power Range | 350W – 4500W |
| Flow Range | 2 – 16 LPM (configuration dependent) |
| Max Working Pressure | Up to 210 bar (option dependent) |
| Relief Valve | Adjustable / preset available (per circuit design) |
| Reservoir Capacity | 3 – 12 L (plastic or steel options) |
| Valve Manifold | Integrated manifold with check/relief/lowering functions |
| Control | Wired remote / Wireless remote |
| Duty Cycle | Intermittent duty for tipping applications (duty by model) |
| Applications | Tipper trucks, dump trailers, scissor hoists, utility dump bodies |
Hydraulic Power Packs Applications
Agriculture & livestock
- Lifting
- Feeding
- Rural automation systems
Meet Us on The Trade Show
Hydrath attends exhibitions worldwide every year:
Hannover Messe
PTC ASIA
Bauma CHINA
You are welcome to book a visit to our exhibitions.
What is a “Tipper Truck Hydraulic Pump”?
a Tipper Truck Hydraulic Pump typically means a 12V/24V DC hydraulic power pack (motor + gear pump + reservoir + valve manifold).
It provides pressurized oil to lift and lower a dump body or trailer hoist, with controls via wired or wireless remote.
It’s a compact, easy‑integration solution for mobile tipping systems.
12V vs 24V tipper truck hydraulic pump: which should I choose?
Choose a 12V tipper truck hydraulic pump for compact trailers and light mobile setups where 12V battery supply is standard.
Choose a 24V tipper truck hydraulic pump on commercial vehicles to reduce current draw at the same power level and support heavier duty cycles.
Always confirm required flow (raise time), pressure, and available electrical capacity.
What is a Single Acting Tipper Truck Hydraulic Pump?
A Single Acting Tipper Truck Hydraulic Pump is a DC power unit designed for power up / gravity down operation.
The pump pressurizes oil to extend a single‑acting cylinder for lifting, while lowering happens by opening the lowering valve and letting the load return oil to the tank under gravity.
It’s simple, cost‑effective, and widely used on dump trailers.
What is a Double Acting Tipper Truck Hydraulic Pump and when do I need it?
A Double Acting Tipper Truck Hydraulic Pump supports power up / power down control, meaning the unit powers both extension and retraction of a double‑acting cylinder.
It’s preferred when you need controlled lowering, better stability on uneven ground, or when gravity return is too slow or inconsistent due to load conditions.
What are common parameters for a DC tipper truck hydraulic pump?
Typical parameters include voltage (12V/24V) , flow (LPM) , max/relief pressure (bar) , reservoir size (L), duty cycle, and control type (wired/wireless).
Many DC tipping power packs target pressure around the ~210 bar class , while flow depends on motor power and pump displacement.
How do I size flow for a tipper truck hydraulic pump (raise time)?
Start with target raise time and cylinder volume requirement.
Faster raise time needs higher flow, but higher flow also increases required electrical power and heat.
For mobile DC packs, keep duty cycle realistic and ensure adequate reservoir volume and thermal margin for repeated tipping.
What valves are typically built into a tipper hydraulic power pack?
Most tipper DC power packs integrate a valve manifold that may include a relief valve (pressure protection), check valve (load holding), and a lowering valve (controlled descent).
This integrated layout simplifies installation and reduces external plumbing for common tipping circuits.
Wired remote vs wireless remote for tipper truck hydraulic pump: what’s better?
A wired remote is simple and robust with minimal signal concerns, often preferred for harsh work environments.
A wireless remote improves operator convenience and safety distance during dumping.
Select based on site safety requirements, operator workflow, and electrical integration needs.
What are typical applications for 12V/24V tipper truck hydraulic pumps?
Common applications include dump trailers, tipper trucks, small dump bodies on utility vehicles, and mobile lifting systems requiring compact installation.
If you need precision in tight spaces, “micro” style hydraulic power units are also used in space‑constrained systems, but tipping usually requires higher flow and duty‑capable designs.
Get an Instant Quote Now
Related Component
Looking for Reliable Hydraulic Solutions?
Let Our Engineering Experts Support You – Anytime.