AC Hydraulic Power Pack Manufacturer
Hydrath is Your Best Choice of Compact AC Hydraulic Power Packs Supplier in China!
- Designing AC Power Packs
- Self-owned Manufacture
- AC&DC Power Pack Hydraulic Systems
- Reliable Power Packs Quality
AC Hydraulic Power Pack Configuration Review
Hydrath specializes in hydraulic cartridge valves, manifold blocks, and mini hydraulic power packs for scissor lifts, tipping trailers, and electric straddle stackers.
Additionally, we support compact AC hydraulic power units with application‑driven configuration and rapid delivery.
With over 10 years’ experience and two Ningbo facilities (valves; power pack assembly/testing), we provide ODM/OEM services with SolidWorks/AutoCAD, CAD/DFM, and complete pressure/flow testing. Consequently, our engineering team helps you scale from prototype to mass production with confidence.
Details
AC Hydraulic Power Pack
- Compact integration: AC motor, gear pump, manifold/valve block, Reservoir
- Motors: integral AC, IEC B14, NEMA C‑face; IEC 63–112, 2/4‑pole
- Power: single‑phase 115/230 VAC; three‑phase 230/380/400/415/460 VAC; S2/S3/continuous duty
- Performance: 1–25 L/min, up to 250 bar; 4–20 L steel/plastic tanks; CETOP 03 (NG6) control
OUR PRODUCT
AC Hydraulic Power Pack Types
Hydrath Provide One Stop Custom Hydraulic Power Pack Solution
110V AC Hydraulic Power Pack
Single‑phase 110V AC solution for automotive and industrial lifts; choose double‑acting for precise power‑up/power‑down or single‑acting for gravity‑down cycles. Additionally, reservoir options include steel or plastic, 2–11 L, with level ports; CETOP‑03 valve stacks, sealed connectors, and S3‑duty design support repeatable cycles.
120V AC Hydraulic Power Pack
Single‑phase convenience with industrial reliability; single‑ or double‑acting control via CETOP‑03 stacks and pilot checks. Pressure‑balanced gear pump sized 0.75–2.1 cc/rev for 1–5 L/min flows; relief typically set around 2,450–2,500 PSI for car lifts and compact scissor platforms. Moreover, continuous or S2 duty options, sealed connectors, and pre‑wired looms simplify installation.
220v Hydraulic Power Pack
Single‑phase 220V solution offering professional control; configure single‑acting power‑up/gravity‑down or double‑acting motion using CETOP‑03 stacks, pilot checks, and pressure‑balanced gear pumps. Meanwhile, S2/S3 duty options align with cycle requirements; suitable for car lifts, compact scissor tables, and dock levelers. Quiet, compact unit with test documentation and rapid customization.
240V Hydraulic Power Pack
240V AC range spans 0.37–7.5 kW motors and delivers 3–25 L/min; adjustable relief 40–250 bar to suit mobile and industrial tasks. In addition, modular CETOP‑03 manifolds enable double‑acting control of up to six cylinders; SAE‑6 ports, B14 flanges, and compact reservoirs (4–20 L) streamline packaging. Vertical or horizontal mounting, single‑acting or double‑acting circuits, and continuous/S2 duty. Applicable to car lifts, scissor platforms, dock levelers, automation, and machine tools.
AC Double Acting Hydraulic Power Pack
Precise power‑up/power‑down control; supports 110/120, 220/240, and 380/415 VAC with motors from 0.55–7.5 kW, pressures up to 250 bar, and flows from 1–25 L/min. Additionally, CETOP‑03 4/3 valve and SAE‑6 ports are standard; steel or plastic reservoirs (4–20 L), vertical/horizontal mounting, and continuous‑duty options available. Ideal for scissor lifts, aerial platforms, material handling, machine tools, and multi‑cylinder systems; expandable via modular manifold stacking.
AC Electric Motor
Hydrath AC motors deliver quiet, energy‑efficient drive for hydraulic power units; supports 230/400 V at 50/60 Hz across 0.18–7.5 kW, with B14 and NEMA mounting plus IP55 and anti‑condensation options. Integrates with modular manifolds, Group 0/1 pumps, and proportional or directional valves; covers 0.3–25 L/min and up to 370 bar. Consequently, compatible with VFD control, HI‑LO dual‑pump setups, and multi‑channel circuits; suitable for mobile and industrial equipment, reducing heat, improving uptime, and lowering maintenance costs.
AC Motor Couping
Hydrath AC motor coupling connects IEC B14 motors to Group 0/1 pumps via bellhousing and elastomeric couplings, controlling concentricity, axial play, and torsional shock across frames 63–112. Additionally, robust alignment practices and Hydrath tolerances help prevent seal wear and bearing damage under continuous duty. Optimized for mobile and industrial platforms; reduces vibration and thermal load, speeds assembly, and supports service‑friendly replacements and standardized spares.
Hydrath Power Applications
AC Power Pack Application Review
Quote Hydrath For Your AC Hydraulic Power Pack Application
Dock Levelers Power Pack
Consistent lift and lip control using a single‑acting main cylinder and double‑acting lip for precise positioning and reliable holding. Additionally, broad AC voltage compatibility (110/120/230/240/400 V) simplifies multi‑site deployment; plastic or metal tanks align with cost and durability goals.
Scissor Lift Tables Power Pack
High‑pressure gear pumps, single/three‑phase motors, and CETOP cartridge manifolds deliver smooth lifting and repeatable lowering. Moreover, choose single‑acting gravity‑down or double‑acting circuits; plastic or steel tanks; vertical or horizontal mounting to match footprint and durability objectives.
Car Lifts Power Pack
Hydrath supplies car lift HPUs with single‑acting circuits for safe raising and reliable holding, plus controlled descent via throttle valves. Expect 180–210 bar and 3–8 L/min, driven by IEC B14 or NEMA C‑face motors in 220 V single‑phase, with optional 110/120 V or 380/400 V. Compact steel or plastic reservoirs (6–15 L).
Balers &Compactors Power Pack
Hydrath’s baler and compactor power packs target 200–250 bar and 10–30 L/min, with 16–100 L reservoirs to manage heat and contamination. We configure CETOP 03/05 manifolds with relief, check, throttle, and directional functions, and offer short lead times to minimize commissioning risk and maintenance costs.
Application
Hydraulic Power Packs Applications
Agriculture & livestock
- Lifting
- Feeding
- Rural automation systems
Custom AC Hydraulic Power Pack Design
- CAD/DFM: SolidWorks and AutoCAD; deliver IGS/STP/X‑T files; circuit DFM for CETOP/cartridge logic and compact manifold layout.
- Selection: IEC B14 motors (frames 63–112) and NEMA 56C/184TC; voltages 230/400V, 50/60 Hz.
Hydraulic AC Power Pack CNC
- Processes: CNC (UG/MasterCAM), PCD tooling for aluminum; steel/aluminum manifolds; precision drilling/tapping; deburring; ultrasonic/precision cleaning.
- Standards: CETOP‑03/05 valve cavities; SAE08/SAE06 ports; dimensional control aligned to catalogue drawings and tolerances.
Hydraulic AC Power Pack Test Bench
- Performance: Pressure tests up to 180–370 bar (platform‑dependent); flow/current sensors; computerized pressure‑flow curves and traceable records.
- Voltage Setting： Single‑phase 115/120 or 220/230/240 VAC; Three‑phase 230/380/400/415/460 VAC; 50/60 Hz
- Environment: IP55 motor checks and multi‑mount verification for industrial duty.
Hydraulic AC Power Pack Shipping
- Protection: Damage‑resistant cartons/pallets; foam/edge guards; moisture protection with plugs/caps and sealed breathers.
- Documentation: Test reports, material certificates, CE/Machinery Directive compliance statements.
- Logistics: Global delivery coordination to EU/NA; consolidated shipments; progress updates.
Meet Us on The Trade Show
Hydrath attends exhibitions worldwide every year:
Hannover Messe
PTC ASIA
Bauma CHINA
You are welcome to book a visit to our exhibitions.
Gallery
Hydraulic AC Power Packs Gallery
| Product Name | AC Hydraulic Power Pack (Compact) |
| Central Manifold | Cartridge manifold (08-2/08-3/10-2) or CETOP 03 (NG6) valve block |
| Motor | IEC 2/4‑pole; 0.37–2.2 kW (single‑phase) / up to 7.5 kW (three‑phase) |
| Gear Pump | External gear pump, 0.2–9 cc/rev |
| Voltage | Single‑phase 115/120 or 220/230/240 VAC; Three‑phase 230/380/400/415/460 VAC; 50/60 Hz |
| Working Pressure | 180 bar up to 250 bar (optional 300–320 bar) |
| Tank/Reservoir | From 3L up to 25L (optional 40L) |
| Flow L/M | 0.3–12 LPM (single‑phase); up to 15–25 LPM (three‑phase) |
| Mounting | Horizontal / vertical |
