Car lift Hydraulic Pump
Hydrath provides a car lift hydraulic pump that installs cleanly, controls safely, and keeps your shop moving.
- AC and DC power units
- 2 post and 4 post lifts,
- single‑acting and double‑acting options
- Integrated valve blocks
- standard NPT/G ports
You get predictable lead times, clear wiring, and maintenance‑friendly filtration to reduce leaks and downtime.
OUR PRODUCT
CUSTOM HYDRAULIC PRODUCT
2 Post Car Lift Pump
2‑post automotive lifts, single‑acting for gravity‑lowering simplicity, deliver typical 1.6–2.0 GPM at 2500–3000 PSI, sized for common cylinder bores and lift heights. Reservoirs are 2.6–5 qt with NPT/G ports, integrated relief, and solenoid controls. Compatible with standard 2‑post frames and mounting patterns, it supports AC 110/220V shop power, helping you install fast and run reliably.
4 Post Car Lift Pump
4 post car lift power unit Available in single‑acting (gravity down), AC 110/220V, power with 2, 2.5, 3, and 3.5hp. Provides 1.0–2.0 GPM at 2500–3000 PSI with tuned valve logic for smooth starts and controlled lowering. Install cleanly, minimize downtime, and keep lift performance predictable across daily cycles.
Single‑acting Car Lift Pump
A single‑acting car lift pump is simple and cost control, AC 110/220V, ideal for two‑post lifts, light four‑post platforms, and retrofit projects where minimal wiring and easy maintenance are priorities. You gain fewer components, clear safety logic, quick installation, and reliable day‑to‑day operation across common service tasks.
Double‑acting Car Lift Pump
A double‑acting car lift pump powers both up and down. Use it on heavier four‑post platforms, specialty lifts, and applications needing controlled descent under variable loads. You benefit from improved positioning, reduced drift risk, and predictable cycle times, while maintenance remains straightforward with accessible filtration and seals.
110V Car Lift Pump
110V car lift pump fits North American shops needing plug‑and‑play installation with standard circuits. Compact form factor, clear safety provisions, and easy maintenance, helping your team install quickly, operate confidently. ideal for two‑post and light four‑post lifts in repair bays, detailing stations, and small fleet garages.
220V Car Lift Pump
220V car lift pump offers efficient power and stable performance on standard shop supply, for EU and many global markets. Available in single‑acting (gravity down), suits two‑post and four‑post lifts, alignment stations, and storage racks. smooth lift motion, secure lowering control, and straightforward installation with familiar wiring practices.
Your Reliable Car Lift Hydraulic Pump China OEM Supplier
Hydrath is your trustble car lift hydraulic pump engineering partner, we support CAD drawing reviews and easy integration with existing frames and cylinders.
Each unit is bench‑tested for pressure and flow consistency and aligned to common shop compliance requirements.
Choose 110V or 220V platforms for global buyers.
With compact footprints and accessible seals, you can install fast, operate confidently, and maintain performance across daily cycles.
Application
Hydraulic Power Packs Applications
Agriculture & livestock
- Lifting
- Feeding
- Rural automation systems
Car lift Hydraulic Pump Design Capabilities
You get a compact car lift hydraulic pump/power unit engineered for clean integration on 2 post and 4 post lifts.
- Provide drawing reviews and CAD files
- Die‑cast aluminum manifold blocks Design
- AC 110/220V options.
- single‑acting or double‑acting control
Manufacturing Capabilities
With a self-owned manufacturer, we provide the following services:
- Casting Manifold
- CNC Turning, Milling, Machining
- Drilling
- Cartridge Valves Manufacturing
- HPU assemble
Testing and Quality Control
Car lift Hydraulic Pump is a complete hydraulic power supply system, they need to be tested before shipment.
- pressure, flow, and directional checks
- consistent performance under realistic duty cycles
- Motor voltage ¤cy
Meet Us on The Trade Show
Hydrath attends exhibitions worldwide every year:
Hannover Messe
PTC ASIA
Bauma CHINA
You are welcome to book a visit to our exhibitions.
What is a car lift hydraulic pump vs. a hydraulic power unit?
They are the same item in car‑lift applications. The terms “car lift hydraulic pump”, “hydraulic power unit (HPU)”, and “hydraulic power pack” are used interchangeably to describe the complete assembled unit with pump, motor, reservoir, valve block, and controls.
You simply choose the configuration that fits your lift: single‑acting or double‑acting, and AC (110/220V) or DC (12/24V).
Single‑acting vs double‑acting car lift hydraulic pump—how do you decide?
Single‑acting powers lift and relies on gravity to lower—simpler and cost‑effective.
Double‑acting powers both up and down—better positioning and descent control for heavier 4 post lifts or precise workflows.
What typical specs should you expect for car lift hydraulic pumps?
Typical ranges are 2500–3000 PSI and 1.0–2.0 GPM, with reservoirs around 2.6–10 qt. Valve blocks include relief/load‑holding functions; ports are usually NPT/G.
How do you choose AC vs DC, and 110V vs 220V platforms?
AC 110/220V suits fixed service bays with consistent power.
DC 12/24V suits mobile or constrained sites.
Choose 110V for North America shop circuits, 220V for EU/global standards.
Is a car lift hydraulic pump compatible with 2 post and 4 post lifts?
Yes. Match flow/pressure to cylinder size and platform load.
For 2 post lifts, single‑acting often suffices;
For 4 post and alignment racks, double‑acting improves controlled lowering and positioning.
How do you size the reservoir for a car lift hydraulic power unit?
Calculate maximum stroke oil volume plus space for return‑oil aeration.
Typical car lift reservoirs are 2.6–10 qt; choose larger sizes for longer platforms and higher duty cycles.
What causes “leaking down” after lift and how do you fix it?
Check valve block seals, cylinder seals, relief settings, and external leaks.
Verify set pressure, inspect spool/seat, and replace worn seals. Stabilize fluid with proper filtration and oil grade.
What wiring and safety essentials should you follow?
Use proper grounding, E‑stop, overload protection, and correct wire gauge per motor current.
Follow local electrical codes and provide clear up/down controls for operators.
Can you replace your car lift power unit with BendPak/Monarch‑compatible models?
Yes， verify port threads, relief settings, flow/GPM, mounting patterns, and electrical compatibility (110/220V, control logic).
Then commission with leak checks and functional tests.
How do you handle cold‑weather operations for car lift hydraulic pumps?
Select lower‑viscosity oil, consider pre‑heating or insulation, and verify cold‑start pressure limits.
Inspect seals suitable for low temperatures to avoid hardening and leakage.
How do Chinese manufacturers support customization and testing for car lift hydraulic pumps?
You can tailor single/double‑acting, AC/DC (110/220/380V), reservoir sizes, and manifold styles.
Units are bench‑tested for pressure, flow, and direction to ensure reliable operation in shops worldwide.
