Hydrath Cartridge Hand Pumps (Screw‑In, Manifold Mounted)

 High-Pressure Cartridge Hand Pump

• A single‑acting cartridge pump optimized for pressure build‑up with smaller displacement (typically 4.3–6 cc/stroke). Within Hydrath’s range, selected configurations can reach up to 400 bar while remaining compact for direct manifold mounting.
• Pressure‑critical circuits such as safety/parking brakes, test ports, and emergency backup where high pressure with minimal plumbing is required.

Single‑Acting Hydraulic Cartridge Hand Pump

• A straightforward manual pump that delivers flow on the power stroke only. It offers simple construction, reliable sealing, and cost‑effective performance.
• Range: Displacements from 4.3 to 12 cc/stroke; typical operating pressure 145–210 bar with model‑dependent capability up to 400 bar.

Small Two‑Speed Cartridge Hand Pump

• A two‑stage manual pump that provides a higher‑flow low‑pressure “approach” stage and a lower‑flow high‑pressure “build” stage. Ideal for fast cylinder approach followed by efficient pressure generation.
• When to choose: Service jigs, portable fixtures, and maintenance tools needing rapid movement at first and solid pressure at the end without changing hardware.
• Manifold integration: Implement stage‑change and relief/bleed functions in the manifold; keep external hoses minimal. Maintain compatibility with C10‑2 cavity where applicable.

Portable Cartridge Hand Pump

• A cartridge pump integrated into a compact manifold block for field service and maintenance. 
• When to choose: On‑site testing, emergency backup, and mobile maintenance where power isn’t available and a compact manifold‑based unit is preferred over large assemblies.
• Materials & seals: Cast iron body with carbon/stainless components;